Technology
Description
| Range of application | truck gear shafts |
| Bed dimensions (l x w) |
1.500 mm x 1.200 mm |
| Press capacity | 25.000 kN |
| Drive | hydraulic |
| Material feeding | tilting device, pusher conveyor feeder, weighing station, part drop-out, feed conveyor, adjustable transfer station, feeding robots |
| Component transfer | robots optionally for cycling and/or transfer operating mode |
| Slide stroke max. | 1.250 mm |
| Die space | 2.500 mm |
| Bed ejectors | three bed ejectors: 1,000 kN, 1, 600 kN, 1,000 kN |
| Slide ejectors | three slide ejectors of 500 kN each |
| Spacing between stations |
400 mm |
| Die change | by means of die change arm and freely movable die change cart |
Optional equipment
- Hydraulic clamping of the die block
- Dynamic three-cylinder mode switching for maximum working speed
- Motorized wedge adjustment of the stroke stop in BDC (bottom dead center)
- Wedge adjustment of the various die stations on the slide
View
Cold extrusion press for the manufacture of gear shafts
To top of page
Print page