Part spectrum/families in the stamping plant
The part spectrum to be manufactured plays an important role in the planning of a new stamping plant, since, among other things, the part spectrum largely determines the required press capacities. The range from small parts to large body panel or doubles is extremely large. A very close analysis of the part spectrum/part family is a basic requirement for successful stamping plant planning.Part spectrum
|
Classification |
Capacity | Typical part family |
| Small | 3.150 - 12.500 kN |
Reinforcements, supports, hinges, recessed grips |
| Medium | 16.000 - 25.000 kN | Door sills, hinge reinforcements, B-pillars, side members, roof frames, recesses for tanks |
| Large | 30.000 - 45.000 kN | Fenders, hoods, deck lids, door inners, outer door skin |
| Super Large | 50.000 - 90.000 kN |
Roofs, roof frames, side apertures, floor pans, outer door skin (double) |
To top of page
Print page