Logo Schuler - Müller-Weingarten
 

Delivery terms and conditions - Schuler Pressen Göppingen

On this page you will find a listing of all terms and conditions for Schuler Presses GmbH & Co. KG. These files are password-protected. Our suppliers receive a password as soon as an order is processed by the purchasing department. If you should have any problems entering your password, please contact the office listed in the sidebar.

General

SN12.60.0 For systems, units and modules; edition 2008-02
SN12.61.1 general requirements; edition 2008-02
SN12.64.0 mechanical equipment; edition 2006-04

Operating instructions

SN12.69.0 guidelines for creating the instruction manuals which are to be supplied to spg; edition 2006-12

Pressure equipment

SN12.63.0 hydraulic, pneumatic and lubrication equipment; edition 2008-02
SN12.67.0 air tanks; edition 2007-11

Preservation

N01.02.01 requirements for paints; edition 2006-08
N01.02.01 requirements for paints, appendix; edition 2005-10

Assembly

SN05.96.0 metric screws, tightening torque; edition 2006-04
SN05.96.1 unc-screws, tightening torque; edition 2002-12
SN12.71.0 securing screw connections; edition 2005-09
SN12.73.0 tooth position to eccentric axis using measurement balls; edition 2000-07
SN12.74.0 installation and support of pipe systems; edition 2005-02
SN12.75.0 argus hose installation; edition 2000-07

Welding

SN12.66.0 for welded parts; edition 2006-08
SN12.68.0 platforms, railings, ladders; edition 2008-02

Machining

SN01.22 curves and chamfers; edition 2002-01
SN04.31.0 general tolerances, DIN 7168; lengths and angles, shape and position, not for new designs; edition 2004-09
SN04.31.1 general tolerances, DIN ISO 2768-1; lengths and angles; edition 2006-12
SN04.31.2 general tolerances, DIN ISO 2768-2; shape and position; edition 2006-12
SN04.32.0 general tolerances for welded constructions, lengths and angles, shape and position; DIN EN ISO 13920; edition 2006-12
SN04.34.1 general tolerances for cast steel parts, DIN 1683-1; edition 2002-04
SN04.34.2 general tolerances for parts made from gray cast iron and nodular graphite iron, DIN 1685-1 / DIN 1686-1; edition 2002-04
SN05.00 threads, overview and tolerances; edition 2005-08
SN05.02 tapped holes/through holes; edition 2007-11
SN08.11 deep drill holes for lubrication; edition 2005-08
SN08.14 lubricating grooves and lubricating holes applications; edition 2008-02
SN08.15 for flat guides and special cases (pressure points and worm gears); edition 2002-08
SN08.16 lubricating recesses in split bushings; edition 2005-09
SN10.10.1 run-out and undercut for metric ISO thread according to DIN 13; edition 2008-02
SN10.10.2 run-out and undercut for pipe thread according to DIN ISO 228-1; edition 2002-07
SN10.10.3 run-out and undercut for trapezoidal screw threads, knuckle screw threads, buttress screw threads and other screw threads with coarse pitches; edition 2002-07
SN10.14 threaded holes; metric ISO fine thread/whitworth pipe thread/to SAE J 475–ANSI B1.1; edition 2000-12
SN10.20 knurls; edition 2002-07
SN10.25.0 countersinks for head screws; edition 2006-10
SN10.40 undercuts DIN 509; edition 2005-01
SN12.66.0 for welded parts; edition 2006-08
Contact person

Schuler AG ©2009